system design
 .webp)
.webp)
.webp)
Main Runner
3600 40 (W) x 60 (H)
The main runner composed of aluminium is the primary load bearing runner section (3600 mm) that utilizes standard hardware connectors as per U-Flex structural ceiling grid system.
Cross Runner 1200
1183 40 (W) x 60 (H)
Cross runner composed of aluminium is the secondary load bearing runner section (1200 mm) that utilizes standard hardware connectors as per U-Flex structural ceiling grid system.
Cross Runner 600
583 40 (W) x 60 (H)
Cross runner composed of aluminium is the secondary load bearing runner section (600 mm) that utilizes standard hardware connectors as per U-Flex structural ceiling grid system.
Perimeter Cross Runner
3600 29 (W) x 60 (H)
The perimeter light-duty extrusion is a light-duty load-bearing runner section (3600mm) directly screwed to the wall or perimeter where there is no need for complete ceiling mounting flexibility.
X Connector
144 (L) x 144 (W) x 29 (H) x 6 (T)
X connectors are high strength and corrosion-resistant cast aluminium construction used to interlock all cross tees for rigid connection.
T Connector
82 (W) x 144 (L) x 29 (H) x 6 (T)
T connector also known as perimeter connectors, composed of high-strength and corrosionresistant cast aluminium construction, are primarily used for installation along the walls/ columns or any other space interface. They are therefore designed to be customized on-site during installation.
L Connector
82 (W) x 82 (L) x 29 (H) x 6 (T)
L connectors are high strength and corrosion resistant die cast aluminium construction used to interlock perimeter extrusion corners together
I Connector
20 (W) x 144 (L) x 29 (H) x 6 (T)
I connectors are high strength and corrosion resistant die cast aluminium construction used to interlock the main beam ends.
Flat Head Hexagonal Screws
M10 x 1.5 X 25 (L)
Philips Socket screws for fixing connectors and services.
Turnbuckle Stud
M10 x 1.5 -RH x 35 (L) – 40 - M10 x 1.5 -LH x 75 (L)
Turnbuckle stud composed of zinc electroplated, is used wherever a fastener of greater length and rigidity is needed to secure the turnbuckle and the runner together.
Turnbuckle
M10 x 1.5 X 181 (L)
Turnbuckle is composed of cast steel alloy and acts as a connecter between threaded rods to create structural support for the grid.
Threaded Rod
M10 x 1.5
Threaded rod composed of zinc electroplated, are used as a ceiling suspension fixed to hard point on one end such as concrete or steel structure and ceiling frame on the other.
Distinctive features
Lightweight system is made up of special grade structural aluminum alloy extrusions and die-casting components.
The suspensions are precisely positioned at a 90 degree angle to ensure optimal alignment between the room void and ceiling void.
90% of the components are made of aluminium, minimizing the possibility of zinc whiskers, thereby reducing the risk of potential hazards.
This system is designed as an attachment platform for hot and cold aisle containment barriers, partitions, and surface-mounted service equipment.
The maximum grid point load is 4.0 kN/ 400 kgs based on a building connection spacing of 1200mm on center.
The overhead plenum is easily accessible with designated openable panels without compromising the structural integrity of the structural grid and the services supported below.
It provides the advantage of drop ceiling and overhead utility distribution, all in one system.
The continuous threaded slot serves as a support structure for all overhead services and fixtures, allowing for the easy installation of firefighting systems, LV tray, and HV tray (busbars, sensors and detectors, lights, CCTV camera, and other such utilities) at any location.
Non-combustible and 100% green and recyclable product offers rapid installation with quick and easy assembly on-site.
The entire construction is pre-engineeredoff-site at the manufacturer's location, facilitating the ease of expansion or upgradation of the project.
Non – penetrative system posing no risk of harmful debris, air or smoke penetrating the data center environment and potentially compromising performance of the server.
The grid system is modular and completely relocatable, offering high flexibility in busbars, cable tray distribution systems, and seamless transition for airtight containment system.
Flexibility to customize the grid span into larger and smaller grids as per project requirements/ conditions, and accommodate ceiling tiles in the future if needed. Layouts are available in 600 x 600mm, 600 x 1200mm, and 1200 x 1200mm.
suspension methods
Support from a Steel Structure
Die casted bracket or beam clamp support from a steel structure on ceiling slab.
Support from a Concrete Slab Structure
Anchor fastener hanging method from a concrete slab structure.
suspension methods
Finish Options
Customized grid size to accommodate project/site requirements.
Standard Finish
Mill Finish
Finishes Available on Request
Natural Anodized
Black Anodized
White Partial
